HPE MicroServer Gen10 BIOS download

Download the HPE MicroServer Gen10 BIOS.

File name:

System_BIOS_v_ZA10A360_for_MicroServer_Gen10_UEFI.zip (3.2 MB)

Version:ZA10A360 (13 Jul 2018)

 

The following issue is resolved in BIOS firmware version ZA10A360:

      • Microsoft-Windows-WHEA-Logger Event ID 22, “A fatal hardware error occurred” error
        messages generated to Windows System Event log on server boot/reboot

Prerequisites:

When updating the System BIOS from version ZA10A320 (or earlier) to version ZA10A330 (or later), the following system BIOS configuration settings will revert to their factory default values:

      • System time and date
      • Hard drive configuration
      • Boot device sequence
      • System passwords
      • Security setup

Before performing the BIOS update, manually record the user customized values for these listed BIOS settings so they can be restored after completing the BIOS update.

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

92e7c8261d76b2f367c6546a83b55d705071f0bd47776618aa35b5480c078db5

System_BIOS_v_ZA10A360_for_MicroServer_Gen10_UEFI.zip

Reboot Requirement:

Reboot is required after installation for updates to take effect and hardware stability to be maintained.

Installation:

    1. Download the zip file to a directory on the target server.
    2. Unzip the file to a temporary directory or USB key.
    3. Switch to the “System_BIOS_v_ZA10A360_for_MicroServer_Gen10_UEFI” folder and verify that the following files are extracted:
    • EFI folder
    • Instruction.txt
    • releasenote.txt
    • ZA10A360.rom
    1. Reboot the system and boot to the embedded UEFI shell.
    2. Select the target device containing the downloaded firmware by issuing “fsx:”, and then press Enter (“x” is the number of the target storage device number in the UEFI shell).
    3. Switch to the “EFI” folder.
    4. Execute “flashbios.nsh” and press Enter to start the firmware update.
    5. After the firmware update process is completed, power cycle the system to ensure that the update is applied and to maintain hardware stability.
    6. Check the BIOS settings and if needed, configure these settings to restore the user customized values.
Posted in Server

Related Posts

1 Comment

  1. Pingback:HP ProLiant MicroServer G7 N54L BIOS download - Cloudrun

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: